140 m Belenus photovoltaic well pump also works with AC

The Belenus 3H.140M-10 solar pumping kit is designed for irrigation or well pumping at heights of up to 140 meters and with a water flow rate ranging from 1,000 to 10,000 liters per hour, depending on the height to which the water needs to be transported. This pump will operate for a full 8 hours in the summer and 6 hours in the winter.

The BELENUS submersible pump works in the following three modes:
- Direct current solar panels
- Alternating current generator -
- 220V AC alternating current

Adaptable to any situation

The interior of the pump is designed in the same way as the Grundfos to suit most pumping conditions, whether high flow rates or very high lifts.

All this without sacrificing efficiency, making the most of the connected photovoltaic energy.

Automatic tank filling control

We've simplified the tank filling control system with our automatic regulator. This allows the system to automatically start and stop based on tank capacity.

It also allows the connection of alternating current for the use of a generator that can be started and stopped completely automatically.

Dry well protection

There are two very important variables to ensure the pump stops before the well dries completely: the first is to protect the pump itself. The second is to preserve the well. That's why we developed the StopFlow system, which automatically shuts down the pump .

Direct current or alternating current, with the same wires!

To operate this pump, you only need three wires, one of which is ground, and through these we can power the pump with either DC or AC current. Yes, it sounds incredible. This way, we meet the need to maximize options when operating a solar pump.

Stainless steel body

Our product is made from the most durable materials. The entire assembly is made of 304 stainless steel.

Wide voltage range

The operating range of our equipment is between 60 and 380 volts, a fundamental value for making the most of the photovoltaic field.

Encapsulated electronics

The system's ease of installation and operation lies in the pump itself. That's where the brains reside. An intelligent electronic system whose work is essential. All protected within the motor body itself.

FEATURES OFFERED BY THE UControl-250x CONTROLLER:
• Select the input power source. In AC mode, the
Input power source can be the grid connection or a generator.
• Power source selection. In DC mode, the
The input power source can be solar panels or batteries. The default power supply is DC.
• Button to switch from automatic mode to AC mode, to DC mode.
• Pump on/off control.
• High voltage protection. The pump motor shuts off when the AC voltage is > 265 V.
• High voltage protection. The pump motor shuts down when the DC current is > 480 V.

This kit includes