30° inclined floor-standing solar panel structure:

The Flat Horizontal Structure/Ground 1 30º structure is designed to support solar panels aligned horizontally on a flat surface that does not have the correct tilt or orientation. This structure model is suitable for any type of solar panel that is even wider than 1 meter and has a maximum length of approximately 2.1 meters. It is suitable for any type of panel that does not exceed these measurements. Its legs are pre-assembled closed triangles to ensure superior sturdiness. The rear braces are responsible for providing greater rigidity to the set. The support surface is very long so that it can be easily anchored to the purlins that support the roof if installed on a sheet metal roof.

The 30º 1 Panel Flat/Floor Horizontal Structure is designed to be installed in the orientation we are interested in and always arranging the panels horizontally. The row of panels will have a standard inclination of 30º with respect to the surface to which the structure is anchored. Optionally, 15º may be required, in case it is installed on a slightly inclined surface , but not enough.

You will receive your 1-story 30º flat horizontal frame/panel along with a detailed assembly drawing. so that you can install the structure easily and without complications.

The 1-panel 30º flat/ground horizontal structure is designed to be used with all types of solar modules, as long as they do not exceed 2.1 x 1.05 meters. Its clamps allow for different types of profile thickness, between 33 and 50 mm.

The anchoring screws for the Flat Horizontal Structure/Floor 1 Panel 30º from the surface on which it will be installed are not included . Depending on the surface on which it is placed (concrete, metal roof, etc.), you will need one type of screw or another, which you will have to purchase yourself. Keep in mind that the surface on which it is installed is able to withstand, in addition to the weight, the stresses caused by the wind. It is your responsibility to ensure that it is installed in a safe and secure location. The advantage of the flat horizontal structure/1-story 30º panel is the speed with which the structure can be installed, since the triangles are pre-assembled and no special tools are required, other than a wrench or pipe and whatever is needed to anchor the structure to the surface on which it is installed.

The materials of the Flat Horizontal Structure/Floor 1 Panel 30º They are made entirely of high-quality aluminum, while the screws and accessories are made of stainless steel.

The EN AW 6005A T6 alloy is a high-strength aluminium alloy, for this reason, as well as for its ability to be anodised, it is used to make structural profiles. All the structures available can be made of anodized aluminum, which has the advantage over raw aluminum structures of greater resistance to corrosion.

The packaging of the Horizontal Flat Structure/Floor 1 Panel 30º is unitary, so if, for example, you need a structure for 4 panels, you must purchase 4 units of this model.

Shipping costs and 10% VAT included. Delivery within 10 days.