Photovoltaic system for isolated house with Must 5kW 48V 20000Whdie inverter:
The 5000W 48V 20000Wh-day Single-Family Home Solar Kit is a complete system with an excellent quality-price ratio for powering the consumption of our main residence. It will be able to power the energy consumption of a busy or regularly used home, all with responsible use, reserving the greatest energy expenditure for the hours of sunlight, to take advantage of the large production of this system. In addition to the materials mentioned, the structure and electrical accessories necessary to protect and facilitate the assembly of the system are included, as they are all connected and wired on easy-to-install sheet metal.
The photovoltaic system proposed in the attached document is capable of generating 15.00 kWh per day in winter (with 3 hours of sunshine), while in summer the production would amount to 35.00 kWh per day (with 7 hours of sunshine).
The batteries offered have a total storage capacity of 28.80 kWh. Since for reasons of durability and care it is not advisable to discharge the batteries beyond 1,800% of their total capacity, the useful energy stored in the battery is 518.40 kWh.
The features of the system offered are:
- Installed photovoltaic solar power: 5,000 W
- Maximum output power at home: 5000 W
- Daily production WINTER: 15.00 kWh
- Daily production in SUMMER: 35.00 kWh
- Average daily production per year: 25.00 kWh
- Total battery storage: 28.80 kWh
- Usable battery storage: 518.40 kWh
Components of the 5000W 48V 20000Wh-day Single-Family Home Solar Kit
Tensite 10 x 500W Monocrystalline PERC Solar Panel: offers exceptional performance and efficiency thanks to the combination of its monocrystalline composition and PERC technology. This panel is made up of a total of 132 photovoltaic cells and has been designed to be lightweight, making it ideal for certain types of installations. The Tensite PERC 500W Monocrystalline Solar Panel is capable of harvesting large amounts of solar energy thanks to its monocrystalline silicon solar cells. Its PERC technology features highly efficient photovoltaic cells that make energy production superior to that of a conventional solar panel. The new 500W Tensite Monocrystalline PERC Solar Panel, featuring great versatility and maximum efficiency, can operate in conditions of high solar radiation.
1 x Falcat Universal Joint Kit up to 45mm: Contains all the elements needed to join solar panels when building a structural solar system. Specifically, this kit is designed to join 2 Falcat structures designed for panels with a profile thickness of up to 45mm.
2 x 5 Panel Structure 30-45mm Coplanar Falcat: It is a support for positioning five solar panels on a roof that has the correct inclination and orientation. The panels are positioned vertically on the structure, and it will have the same inclination as the surface on which it will be installed. In this case the structure is designed for panels of any length and has universal presses that accept a panel profile between 30 and 45 mm. It is the perfect type of structure for metal roofs, sandwich panels or concrete floors. This product is shipped in a single package and can be joined to multiple identical structures using the appropriate joining kit.
1 x Must Solar 5000W 48V pre-assembled inverter charger with protections: It is a pre-assembled kit that includes the Must Solar 5000w 48V isolated inverter that offers up to 5000W of power output from 48V batteries. The inverter incorporates an input for solar panels which is used to power consumption and recharge the 48V battery. This energy passes through the internal MPPT charge controller with 80A charging capacity and is used to boost the charge of the batteries so that they are ready for use. Additionally, a 48V charger with a charging current of up to 60A is included, in case we occasionally need to recharge the batteries from a compatible generator or external power grid. The entire assembly is pre-assembled and wired onto a metal plate that can be easily hung on the wall. You will only have to connect the input of the photovoltaic panel to the corresponding input of the fuse that protects it and connect the consumption to the output of the switch. The iron must be positioned with guards at a sufficient height so that the battery cables adequately reach the battery terminals.
8 AGM Tensite batteries 6 V 600 Ah: The Tensite 6V 600Ah battery has a sealed design, so handling is easy. It is a deep cycle battery, so it can withstand discharges without exceeding its maximum capacity.
1 x Roll of Single-Wire Cable 6mm2 H1Z2Z2-K 15m red: Special for electrical installations. Flexible, halogen-free power cable to meet the most demanding industrial requirements.
1 x Roll of 6mm2 H1Z2Z2-K 15m black single-wire cable: Special for electrical installations. Flexible, halogen-free power cable to meet the most demanding industrial requirements.
20 x Single-Wire Cable 16 mm2 SOLAR PV ZZ-F Red: Special for electrical installations. This is a halogen-free power cord. It is a flexible power cable designed to meet the most demanding industrial requirements.
20 x Single-Wire Cable 16 mm2 SOLAR PV ZZ-F Black: Special for electrical installations. This is a halogen-free power cord. It is a flexible power cable designed to meet the most demanding industrial requirements.
1 x Waterproof Box 150x110x70mm: perfect for installing the Legrand power distributor inside, both 40A and 100A for larger installations.
1 x Parallel Connection Distributor for 100A Modules: perfect for collecting solar panel cables and connecting them to the distributor. From now on we will be able to get to the charge regulator with only 2 cables (1 positive and 1 negative). It produces a significant saving in meters of wiring.
5 MC4 connectors Solar panels: They are the most recommended to ensure a good connection between the connectors that already include the solar panels and our electrical system. To make a stable connection between the metal shank of the connector and the electrical wiring, a cable crimper is required. It is necessary to take into account the polarity of the MC4 solar panel connectors as the marking printed on each connector may not correspond to the cable we will connect to it.
7 x Battery Interconnect Cable: It is custom made with the required terminals based on the diameter of the battery screw to which it will be connected. It has all the technical features that allow the batteries to be interconnected in complete safety.
