Stand-alone photovoltaic system with 3kW 24V 6400Whdie inverter:
The photovoltaic system proposed in the attached document is capable of generating 6.60 kWh per day in winter (with 3 hours of sunshine), while in summer production would amount to 15.40 kWh per day (with 7 hours of sunshine).
The features of the system offered are:
- Installed photovoltaic solar power: 2,200 W
- Daily production in winter: 6.60 kWh
- Daily production in SUMMER: 15.40 kWh
- Average daily production per year: 11.00 kWh
3000W 24V 6400Whdie Solar Kit Components
Tensite PERC monocrystalline solar panel, 4 x 550 W: offers efficiency exceeding 21%. Its design has been redesigned to offer greater efficiency while reducing its size. This photovoltaic module is specifically certified to operate under high-performance conditions, making it a solar panel suitable for any installation. With more than 13 A and a maximum supply voltage of 42 V, it offers unparalleled power at a reasonable price. Panel dimensions: 2279 x 1134 x 35 mm
Front Battery 2 x Tensite AGM 250Ah 12V: Front-type monoblock battery that does not emit gas and requires no maintenance. It is an excellent option when you want to install the battery in a place without ventilation. It is recommended to install it in its natural position and under no circumstances connect it in parallel. It is a battery with excellent value for money and offers a 2-year manufacturer's warranty. It has two handles for more comfortable carrying and its terminals are located at one end of its upper part.
1 x Must Solar 3000W 24V Inverter Charger pre-assembled with protections: This is a pre-assembled kit that includes the Must Solar 3000W 24V off-grid inverter that delivers up to 3000W of power output from 24V batteries. The inverter incorporates an input for solar panels which are used to power consumption and to recharge the 24V battery. This energy passes through the internal MPPT charge controller with a charging capacity of 50A and is used to boost the charge of the batteries so that they are ready for use. Additionally, a 24V charger with a charging current of up to 30A is included, in case we occasionally need to recharge the batteries from a compatible generator or external power grid. The entire set is pre-assembled and wired onto a metal plate that can be easily hung on the wall. Simply connect the input of the photovoltaic panel to the corresponding input of the fuse that protects it and connect the load to the switch output. It will be necessary to position the plate with the protectors at a sufficient height so that the battery cables reach the battery terminals correctly.
1 x 4 Panel Structure 30-45mm Coplanar Falcat: It is a support for positioning four solar panels on a roof that has the correct inclination and orientation. The panels are positioned vertically on the structure, and this will have the same inclination as the plane on which it is installed. In this case, the structure is designed for panels of any length and has universal clamps that allow a panel profile between 30 and 45 mm. It is the perfect type of structure for roofs with metal roofs, sandwich panels or concrete floors. This product is shipped in a single package and can be joined to multiple identical structures using the corresponding connection kit.
1 x Roll of 6mm2 H1Z2Z2-K 5m red single-wire cable: designed for applications in electrical systems. Halogen-free and flexible power cable to meet the most demanding industrial requirements.
1 x Roll of 6mm2 H1Z2Z2-K 5m black single-wire cable: designed for electrical installations. Halogen-free and flexible power cable to meet the most demanding industrial requirements.
1 x Roll of 10mm2 single cable H1Z2Z2-K 10m red: special for electrical installations. Halogen-free and flexible power cable to meet the most demanding industrial requirements.
1 x Roll of Single Wire Cable 10mm2 H1Z2Z2-K 10m Black: special for electrical installations. Halogen-free and flexible power cable to meet the most demanding industrial requirements.
2 WEIDMULLER PVStick connectors: They are the most recommended if you don't have a crimping tool to connect normal MC4 connectors. They are compatible with all connector models offered as standard in solar panels and do not require any type of tool to assemble them on the cable.
1 x Waterproof Box 150x110x70mm:Â perfect for installing the Legrand power splitter inside, both 40A and 100A for larger installations.
1 x Parallel Connection Splitter Modules 100A: perfect for collecting cables from solar panels and connecting them to the splitter. From now on we can go with only 2 cables (1 positive and 1 negative) to the charge regulator. It produces significant savings in meters of wiring.
1 x Battery Interconnect Cable: It is custom made with the required terminals based on the diameter of the battery screw to which it will be connected. All the technical features that allow for the safe interconnection of batteries are available.
