Huawei single-phase 6kW photovoltaic system + 10kWh storage:
The The Huawei 6000W 31,500Whdia Self-Consumption Kit is a high-performance self-consumption system at a very affordable price. This self-consumption kit incorporates a Huawei lithium battery and a Huawei SUN2000 inverter with 2 MPPTs. All components enjoy the highest reliability, with a 10-year warranty for both the battery and the inverter. With this Huawei system, we can have a complete self-consumption system with the option of storing excess production. During periods of low solar radiation, we can use the stored energy to reduce energy dependence. If necessary, the battery capacity can be expanded with additional modules. This kit also includes a wattmeter to measure the energy required for our consumption and to recharge the battery, thus avoiding the need to feed excess production into the grid, if desired. No components require maintenance, and all the elements necessary for commissioning the system are included, including wiring and panel structures.       Â
The photovoltaic system proposed in the attached document is capable of generating 21.00 kWh per day in winter (with 3 hours of sunshine), while in summer the production would amount to 49.00 kWh per day (with 7 hours of sunshine).
The features of the system offered are:
- Installed photovoltaic solar power: 7,000 W
- Daily production in winter: 21.00 kWh
- Daily production in SUMMER: 49.00 kWh
- Average daily production per year: 35.00 kWh
Components of the Huawei 6000W 35000Whdie Self-Consumption Kit
14 x 500W Monocrystalline Bifacial Solar Panel: Offers exceptional performance and efficiency thanks to the combination of its bifacial monocrystalline composition.
- Thinner bus bar design, larger reception area, higher output power.
- Smaller distance between busbars, shortening of the current path, reduction of resistance loss.
- Unique circuit design, combination of series and parallel circuits, minimizing the shadow effect, reducing the internal power supply.
1 x Huawei SUN2000-6KTL-L1 6000W inverter: With an output power of 6000W, it is characterised by being designed to operate in installations with a mains connection. You have the option of adding lithium batteries to store excess energy and consume it during times when consumption exceeds photovoltaic production or during nighttime hours. It incorporates top-level features, such as 2 MPPT trackers with a very long range. Perfect for having 2 orientations with the panels, although it also includes support for individual optimizers that avoid partial shadows. It includes, among other things, wireless communication, IP65 protection and a 10-year manufacturer's warranty.
1 x DDSU666-H Huawei Smart meter : The Huawei Smart Power Sensor is a single- phase sensor for self-consumption solar photovoltaic systems . Thanks to the Smart Power Sensor, Huawei SUN2000L Smart Energy Center solar inverters can display not only solar production but also system demand and can be programmed for zero feed-in to the grid.
2 Huawei Luna2000 5kWh Lithium Battery Modules: With a 10-year warranty, it is a high-voltage storage module compatible with Huawei KTL Single-Phase L1 and KTL Three-Phase M1 inverters. It requires a BMS at the top so that the system is complete and expandable with up to 3 units total. To obtain 20, 25 or 30kWh, an additional BMS module and a total of 4.5 or 6 storage modules are required respectively. It features IP65 protection and total expansion capacity of up to 30kWh for our Huawei hybrid inverter self-consumption system.
1 x Huawei Luna2000 BMS: It is a controller that acts as an interface between the inverter and the Huawei Luna batteries. Compatible with Huawei KTL Single-Phase L1 and KTL Three-Phase M1 inverters. This BMS is located above the battery and is used for a system between 5 and 15kWh depending on whether we install between 1 and 3 battery modules. To obtain 20, 25 or 30kWh, an additional BMS module and a total of 4.5 or 6 storage modules are required respectively. It features IP65 protection and expansion capacity up to 30kWh for our Huawei hybrid inverter self-consumption system.
2 x 7 Panel Structures 30-45mm Coplanar: It is a support for positioning six solar panels on a roof that has the correct inclination and orientation. The panels are positioned vertically on the structure, and it will have the same inclination as the surface on which it will be installed. In this case the structure is designed for panels of any length and has universal presses that accept a panel profile between 30 and 45 mm. It is the perfect type of structure for metal roofs, sandwich panels or concrete floors. This product is shipped in a single package and can be joined to multiple identical structures using the appropriate joining kit.
1 x Roll of 6mm2 H1Z2Z2-K Single-Wire Cable 50m Red: This power cable is specially designed for electrical installations. It is halogen-free and highly flexible, making it suitable for demanding industrial environments. Â
1 x Roll of 6mm2 H1Z2Z2-K Single-Wire Cable, 50m, Black: Specially designed for photovoltaic systems, both mobile and fixed. It is certified by TÃœV according to IEC 62930 and EN 50618 standards, which guarantee its quality and safety. Â
4 MC4 solar panel connectors: these are the most recommended for ensuring a good connection between the connectors already attached to the solar panels and our electrical system. To make a stable connection between the metal shank of the connector and the electrical wiring, you will need a cable crimper. It is important to note the polarity of the MC4 solar panel connectors, as the marking printed on each connector may not match the cable we will connect to it.  Â
Shipping costs and 10% VAT included. Delivery within 10 days.
Reduced VAT request form for PRIVATE INDIVIDUALS |
|
Request form for reduced VAT for COMPANIES |
|